How Much Horsepower Does a 383 Stroker Have? (Answered!)

How Much Hp Does A Lt1 383 Stroker Have?

The Chevy 383 is one of the most popular engines for muscle cars, and that is no surprise as it has been around for a long time and has plenty of history. The engine was introduced in 1955 to replace the 348ci small block, Chevy. Over the years, this engine has had many variations, but today we will focus on the 383 stroker kit or simply a stroker kit with no other modifications.

How much horsepower does a 383 stroker have? This engine can make about 330 to 410-pound feet of torque and anything from 350 to 400 horsepower. However, you can add horsepower using a kit.

A 383 stroker could be right if you want a powerful, affordable engine. It is the perfect choice for many people, including those who want to build a high-performance street car.

What Is A Chevy 383 Stroker Engine?

The Chevy small-block engine is a line of V8 engines. It has been built to accept larger pistons, which give the motor more displacement and, eventually, more power.

Over the years, the Chevy small block has undergone numerous changes, including its cylinder heads, crankshaft, block, and more updates. With these updates came an increase in the number of cylindersβ€”from four to six, six to eight, and finally, five up to 12.

With each successive model year comes more power from your favorite engines. But if you’re looking for more horsepower than you currently have with a stock engine, installing one of these stokers could be a perfect choice.

What Is A Horsepower?

A horsepower is a measurement of power, defined as the rate at which work is done. Power is best expressed in terms of watts but can also be expressed as foot pounds per minute.

One horsepower has the same mechanical energy as 33,000 foot-pounds per minute (FPM). Therefore, for something to be considered one horsepower, it must have the ability to produce 33,000 FPM or 745.7 watts over one hour.

The camshaft and intake manifold can greatly affect horsepower ratings. It is the most important part of a 383 Stroker engine. If you have a bad intake manifold, you’ll get less power. If you have a good intake manifold, you’ll get more power.

How Does Horsepower Affect The Performance Of A Car?

Horsepower is a measurement of how much power a motor can produce. While it doesn’t tell you exactly how fast your car will go, it does give you an idea of how much torque and acceleration potential it has. The more horsepower your engine has, the faster you’ll be able to accelerate and reach higher speeds without sacrificing fuel efficiency or reliability.

How Much Horsepower Can A Stroker Kit Add?

You can make up to 450 to 475 horsepower with the right combination of parts, but the average is around 350. The Chevy 383 stroker engine is popular because it’s easy to modify and can be used in many racing applications.

The Chevy 383 stroker engine effectively modified the popular 350 engine. As a result, the 383 stroker engine is often used by Chevrolet enthusiasts, providing more power than a standard 350 engine.

What Is The Difference Between A 383 and A 383 Stroker?

A 383 Stroker engine is a type of engine that has been modified to increase power over a stock 383 engine.

If you’re asking, “What is the difference between a 383 and a 383 Stroker?” then you are probably looking for this answer: The stroker has a longer stroke, causing the piston to travel faster. As a result, the rod and piston have farther to go in their cycle at any given engine rpm than before. This process increases the piston’s speed, causing it to pull more air into the engine.

At 2,500 rpm, a 383’s piston moves at the same speed as a 350s at 3,100.

Advantage Of The 383 Chevy Stroker A Good Engine

If you’re looking for an engine that will provide great performance and reliability, then the 383 Chevy stroker is what you need. It has much more torque than most other engines and generates more horsepower. As a result, you can get the job done faster with fewer problems with more power.

Another advantage of this type of engine is how easy it is to work on when something does go wrong with it or if any repairs need to be made on it because they have very few moving parts inside them, which make them easy to work on as well as being less expensive compared to some other types of engines out there which only adds up into making things even easier for anyone who wants one but doesn’t have enough knowledge or experience working with cars before now!

Disadvantage Of The 383 Chevy Stroker Engine

The disadvantage of a 383 stroker engine is the cost to build. However, if you plan on using an aftermarket crate engine, the parts may not be as expensive as making them yourself.

However, to start with a bare block, you must purchase everything needed to complete your project. In addition to this expense, there are other costs associated with building, such as:

  • The machine shop fees
  • Racing fuel (if applicable)
  • The tires that come with your new car’s wheel package


That said, a few things to remember when considering a 383 stroker engine. The first is that the larger displacement means that your vehicle will have slightly lower fuel economy than stock or naturally aspirated engines.

Secondly, the larger size means your vehicle will be heavier and have less acceleration off the line than vehicles with smaller engines like those found in muscle cars or sports cars. These two factors make it important for owners who want more power but don’t need it all the time to consider whether this engine will work well for them before making any decisions about purchasing one.

So, that’s it! If you’re looking for a powerful engine that will give your vehicle the performance it needs, then a 383 stroker engine is what you want. However, if you don’t need all that power and are simply looking for something that will improve your gas mileage or acceleration off the line, this may not be the best choice for you.

Scroll to Top